Copying data to the HDD Photo Storage

This section explains how to use the COPY button on the unit to copy data from a “Memory Stick” or CompactFlash card to the internal hard disk of the unit.

Hint

For information on how to connect the unit to a computer to copy, see “Connecting to a computer” (page 22).

Notes

•The data read/write speed depends on the combination of “Memory Stick” and equipment.

•Data from a “Memory Stick” that has the access control attribute set on another device cannot be read or copied on the unit. To enable reading and copying of such data, you must first disable the access control on the other device.

•MagicGate-compatible data can be copied but not played back with the unit. Once MagicGate-compatible data is copied to the unit, it cannot be copied back to the “Memory Stick”, either.

1Turn on the unit.

Push and slide the ?/1 (power) switch in the direction of the arrow. Hold the ?/1 (power) switch until the 1 e (power) indicator lights.

Hold down and slide in the direction of the arrow

Hint

The color of the 1 e (power) indicator differs, according to the remaining charge of the internal battery. For details, see “About the battery capacity” (page 14).

2Insert the “Memory Stick” or CompactFlash card into the unit (page 15, page 17).

The media indicator, the (hard disk) indicator, and the COPY button light green.

Example: When a “Memory Stick” is inserted

unit the to data Copying

19