98
Table of Contents Useful Recording Techniques Index

Set the GPS switch to ON in advance.

Steps
(MENU) [CLOCK/ LANG] (under [GENERAL SET] category)
[AUTO CLOCK ADJ] a desired setting
ON Adjusts the clock automatically.
OFF Does not adjust the clock automatically.
Notes
Y
ou must set the date and time on your camcorder before using your camcorder (p. 22).
There may be discrepancies of a few seconds even if [AUTO CLOCK ADJ] is activated.
The clock is adjusted automatically by [AUTO CLOCK ADJ] when you turn off your camcorder if the
camcorder is receiving a GPS signal while it is being used. The clock is not adjusted until the camcorder
is turned off. Also, the clock is not adjusted unless the camcorder is receiving a GPS signal, even if the
GPS switch is set to ON.
AUTO AREA ADJ (Auto area adjustment) (HDR-CX500V/CX520V)

Your camcorder will compensate for a time differences with the current area automatically

when it detects a time difference, by acquiring the current location information from GPS.

Set the GPS switch to ON in advance.

Steps
(MENU) [CLOCK/ LANG] (under [GENERAL SET] category)
[AUTO AREA ADJ] a desired setting
ON Compensates for the time difference with the current area automatically.
OFF Does not compensate for the time difference with the current area
automatically.
Notes
Y
ou must set date and time on your camcorder before using your camcorder (p. 22).
DST SET/SUMMERTIME

You can change this setting without stopping the clock. Set to [ON] to move the time forward

1 hour.

Steps
(MENU) [CLOCK/ LANG] (under [GENERAL SET] category)
[DST SET] or [SUMMERTIME] a desired setting
OFF Does not set the DST SET.
ON Sets the DST SET.
LANGUAGE SET

You can select the language to be used on the LCD screen.