Black & Decker MZ2000P English, After use, Inspection and repairs, Electrical safety, Unpacking

English

After use

Switch off and remove the plug from the power outlet when not in use, before assembling or disassembling parts, cleaning or carrying out any maintenance of the appliance. Never pull the cord while removing it from the power outlet.

Keep children and animals away from the unit and cord set.

Inspection and repairs

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Electrical safety

This product must be earthed.

Always check that the power supply corresponds to the voltage on the

rating plate

Power plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor plugs with earthed (Class l) appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock.

Never operate an appliance directly below the socket-outlet it is connected to.

Do not insert any object into the openings on the outer case.

Extension cables & Class l product

•A 3-core cable must be used as your appliance is earthed and of Class l construction.

•Up to 30m (100 ft) can be used without loss of power.

•If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

Features (Fig. A)

1Door safety lock

2Door

3Window

4Control panel

5Timer control / Weight Defrost

6Power control

7Roller support

8Glass tray

9Stem

10Door release

Unpacking

•Remove all packaging from the appliance.

•Inspect the oven after unpacking for any damage such as a misaligned or damaged door, dents or holes in the door window and screen, and any dents in the cavity. If any of these are seen, DO NOT use the oven.

•Clean the appliance before first use.

Assembly (Fig. B)

Warning! Before assembly, make sure that the appliance is switched off and unplugged.

•Place the appliance on a flat, even surface.

•Open the door (2) & place the stem (9) into the hole in the cavity base. The door is opened by pressing the door release (10).

•Place the roller support (7) into the hole in the cavity.

•Align the glass tray (8) on top of the roller support.

•Connect the appliance to a suitable electrical supply.

-6-