Adjusting the Iris and Menu Knobs

Locking Ring

Both the IRIS and MENU knobs are factory adjusted. However these knobs may need to be adjusted because camcorders do tend to vary in size, Therefore, it is recommended to try out these two knobs after the initial camcorder insertion (p.8). Difficulty in operating either the IRIS or the MENU knob could indicate that adjustments are required on the knobs.

To make the adjustments

1.Remove the camcorder from the housing.

2.Using the supplied allen key, loosen the set screw of either the IRIS or MENU knob mechanism as illustrated. This will release the o-ring friction plate and allow you to adjust it by turning it CW or CCW for more or less friction on the camcorder. Once the adjustment is made, re-tighten the set screw.

3.Replace the camcorder into the housing and try the knobs once again for proper operation. Repeat procedure if necessary.

PREPARING CAMCORDER & HOUSING

IRIS knob mechanism

Allen Key (supplied)

MENU knob mechanism

VIEWFINDER EYEPIECE

The viewfinder eyepiece located on the rear of the housing may also need adjustment. To adjust, simply turn the inside ring on the viewfinder CW or CCW to achieve perfect focus with the camcorder viewfinder. Tighten the locking ring up against the viewfinder body to lock the eyepiece in place once adjusted.

Adjustment Ring

REPLACING THE BAYONET LENS

The PHENOM is provided with a wide angle bayonet mounted lens. In order to protect the optics, covers are provided with the lens.

1.To remove the lens, push and hold the button on the lower right of the front bulkhead and then turn counter clockwise until the lugs are free from the bayonet ring. Pull gently on the lens to release it.

2.Remove the covers from the replacement lens. Place them in a clean and dry environment to avoid any damage. Make sure the seals on the bottom part of the lens are clean and free from dust and debris.

3.Put a small amount of lubricant on the o-ring seals and the sealing surface of the housing.

4.Line up the bayonet lug marked by a hole with the printed dot on the front bulkhead of the housing. Push the lens all the way until it sits on the bayonet ring and turn clockwise. You will hear a positive click and the lens will lock into place.

Lens release button

HVR-Z1, HDR-FX1 specifications

The Sony HDR-FX1 is a pioneering high-definition camcorder that garnered significant attention upon its release in 2004. It is especially noted for being one of the first camcorders to offer true 1080i high-definition recording capabilities, catering to both amateur filmmakers and professionals alike. Equipped with a 1/3-inch CMOS sensor, the FX1 captures stunningly detailed images, ensuring that each frame is rich in color and clarity.

One of the notable features of the HDR-FX1 is its advanced imaging technology, including the use of Sony’s ClearVid sensor and a 3D Color Filter. This combination enhances the camera's ability to render vibrant colors and fine details, providing beautiful images even in challenging lighting conditions. The FX1 supports a 16:9 aspect ratio, allowing users to create cinematic productions with ease.

The camcorder also features a Carl Zeiss Vario-Sonnar T lens with a focal length of 5.4 to 64.8 mm (35mm equivalent: 40 to 480 mm), which provides excellent optical performance and versatility. The lens has a remarkable maximum aperture of f/1.6, allowing for great low-light performance and beautiful bokeh effects. The optical image stabilization system further enhances the shooting experience by minimizing the effects of camera shake, making it easier to capture steady footage.

Sony's HDR-FX1 adopts the HDV format for high-definition video recording, utilizing a standard MiniDV tape, which was innovative for its time. This allowed filmmakers to easily transfer footage to their editing systems without needing extensive additional equipment. Additionally, the FX1 features a built-in HDMI output, enabling direct connection to high-definition displays for detailed playback of recorded footage.

The camcorder includes a range of manual controls, such as focus, iris, and shutter speed, which provide users with the flexibility to fine-tune their settings. A 3.5-inch swing-out LCD screen allows for easy monitoring and composition, while an electronic viewfinder ensures accurate framing in bright conditions.

Overall, the Sony HDR-FX1 marked a significant milestone in the evolution of video technology, combining accessibility with professional features, making it a beloved choice among videographers and filmmakers looking to dive into the world of high-definition video. Its legacy continues to influence subsequent camcorder designs and remains a respected model in the realm of digital filmmaking.

Sony HDR-FX1 Adjusting the Iris and Menu Knobs, Viewfinder Eyepiece, Replacing the Bayonet Lens

Models: HVR-Z1 HDR-FX1