(Warning indicator pertaining to battery pack temperature)

•The battery pack is too hot. Replace the battery pack, or remove it and put it in a cool place.

(Warning indicator pertaining to battery pack temperature)

•The battery pack is too cold. Replace the battery pack, or remove it and put it in a warm place.

Q(Warning indicators pertaining to the tape)

Slow flashing:

•There is less than 5 minutes remaining on the tape.

•No cassette is inserted.

•The write-protect tab on the cassette is set to lock (p. 105).

Fast flashing:

• The tape has run out.

Z(Eject cassette warning)

Slow flashing:

•The write-protect tab on the cassette is set to lock (p. 105).

Fast flashing:

•Moisture condensation has occurred (p. 110).

•The self-diagnosis display code is displayed (p. 101).

- (Warning indicator pertaining to the write-protect of the “Memory Stick Duo”)

•The write-protect tab on the “Memory Stick Duo” is set to lock (p. 106).

zTips

•You will hear a beep when certain messages appear on the screen.

Description of warning messages

If messages appear on the screen, follow the instructions.

xBattery/Power

Cannot use this battery in the camcorder. (p. 107)

xMoisture condensation

%Z Moisture condensation. Eject the cassette (p. 110)

%Moisture condensation. Turn off for 1H. (p. 110)

xCassette/Tape

ZReinsert the cassette. (p. 23)

•Check if the cassette is damaged.

QZ The tape is locked - check the tab. (p. 105)

x“Memory Stick Duo”

Reinsert the Memory Stick.

(p. 23, 106)

•Reinsert the “Memory Stick Duo” a few times. If even then the indicator flashes, the “Memory Stick Duo” might be damaged. Try with another “Memory Stick Duo.”

This Memory Stick is not formatted correctly.

•Check the format, then format the “Memory Stick Duo” as necessary (p. 77, 106).

102