Locating a scene on a tape
A
B
C
E
F
DG
H
bNotes
•See page 122 for details on how to use the Remote Commander.
Searching quickly for a desired scene (Zero set memory)
1 During playback, press the ZERO SET MEM button H on your camcorder or the ZERO SET MEMORY button D on the Remote
Commander at the scene where you want to create a cue point.
The tape counter is reset to “0:00:00”
and appears on the screen.
60min 0:00:00
If the tape counter is not displayed, press the DISPLAY button G.
2 Press the STOP button F when you want to stop playback.
3 Press the mREW button C.
The tape stops automatically when the tape counter reaches “0:00:00.”
The tape counter returns to the time
code display, and disappears.
4 Press the PLAY button E.
Playback starts from the point designated “0:00:00” on the tape counter.
To cancel the operation
Press the ZERO SET MEM button H or the ZERO SET MEMORY button D again before rewinding.
bNotes
•There may be a discrepancy of several seconds between the time code and the tape counter.
•Zero set memory will not function correctly if there is a blank section between recorded sections on the tape.
Recording/Playback
Continued , 51