Troubleshooting (Continued)

•Set the write-protect tab to REC or insert a new cassette (p. 100).

•The tape is stuck to the drum due to moisture condensation. Remove the cassette and leave your camcorder for at least 1 hour, then re-insert the cassette (p. 107).

The zoom does not function.

• You cannot use the zoom while executing [SHOT TRANS].

You cannot record on the “Memory Stick Duo.”

•Release the lock on the write-protect tab of the “Memory Stick Duo.” (p. 102)

•The capacity is full. Delete unnecessary pictures recorded on the “Memory Stick Duo.” (p. 67)

•Format the “Memory Stick Duo” on your camcorder or insert another “Memory Stick Duo.” (p. 49)

•You cannot record movies with this unit on the “Memory Stick Duo.”

•When the POWER switch is set to CAMERA-TAPE, you cannot record still images on the “Memory Stick Duo” with:

–[PICT. EFFECT]

–[D. EFFECT]

–[COLOR SLOW S]

–[SUPER NS]

–When [SHUTTR SPEED] is set to less than 1/25

–While executing [FADER]

–[COLOR BAR]

The recording angle differs depending on the POWER switch setting position.

•The recording angle when the POWER switch is set to CAMERA-MEMORY is wider than when it is set to CAMERA-TAPE.

You cannot record a smooth transition on a tape from the last recorded scene to the next.

•Note the following.

–Perform END SEARCH. (p. 31).

–Do not remove the cassette. (The picture will be recorded continuously without a break even when you turn the power off.)

–Do not record pictures in the HDV and DV formats on the same tape.

–Do not record pictures in the SP and LP modes on the same tape.

–Avoid stopping then recording a movie in the LP mode.

The shutter sound is not heard when you record a still image.

• Set [BEEP] to [ON] (p. 58).

The internal flash does not work.

84