STANDARD SET menu (Continued)
You can display the frame and check that the subject is horizontal or vertical by setting [GUIDEFRAME] to [ON]. The frame is not recorded. Press DISPLAY/ BATT INFO to make the frame disappear.
•Pointing the subject at the cross point of the guide frame makes a balanced composition.
COLOR BARYou can display the color bar or record it on the tape by setting [COLOR BAR] to [ON]. It is convenient to adjust the color on the monitor connected.
DATA CODEDuring playback, displays the information recorded automatically (data code) during recording.
OFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays camera setting data.
60min | 0:00:00:00 | 1 | |
|
|
| 2 |
|
| AUTO | 3 |
| 100 AWB | ||
| F1. 8 | 9dB |
|
6 5 4
SteadyShot off* Exposure*
White balance* Gain*
Shutter speed Aperture value
* Appears only during tape playback.
•The exposure adjustment value (0EV), a shutter speed, and the aperture value appear when still images on a “Memory Stick Duo” are played
back.
•appears for a picture recorded using a flash.
•In the DATE/TIME data display, the date and time are displayed in the same area. If you record a picture without setting the clock,
REMAININGAUTO
Displays the remaining tape indicator for about 8 seconds in situations such as those described below.
•When you set the POWER switch to PLAY/ EDIT or
• When you touch | (Play/Pause). |
ON
Always displays the remaining tape indicator.
REMOTE CTRL (Remote control)The default setting is [ON], allowing you to use the Remote Commander (p. 32).
•Set to [OFF] to prevent your camcorder from responding to a command sent by another VCR remote control unit.
REC LAMP (Recording lamp)The camera recording lamp will not light up during recording when you set this to [OFF]. (The default setting is [ON].)
BEEPON
A melody sounds when you start/stop recording, or operate the touch panel.
OFF
Cancels the melody.
DISP OUTPUTLCD PANEL
58