
8.Turn the indicated Adjustment Knob (9) counterclock- wise and remove it. Insert the Seat Post (5) into the Frame (1). Align one of the adjustment holes in the Seat Post with the indicated hole in the Frame. Insert the Adjustment Knob into the Frame and the Seat Post,
and | turn the Knob clockwise until it is tight. | Make sure |
that | the Knob is inserted through one of the |
|
adjustment holes in the Seat Post. |
|
9. Identify the Left Pedal (24), which is marked with an |
| |||
“L.” Using an adjustable wrench, | firmly tighten | the | ||
Left Pedal | counterclockwise | into the left arm of the |
| |
Crank (21). Tighten the Right Pedal (not shown) | clock- | |||
wise | into the right arm of the Crank. | Important: |
| |
Tighten both Pedals as firmly as possible. After |
| |||
using the exercise cycle for one | week, retighten the |
| ||
Pedals. For best performance, the | Pedals must be |
| ||
kept tightened. |
|
|
|
8 |
5 |
Adjustment |
Holes |
1 |
Hole |
9 |
9 |
21 |
24 |
Tab |
10.Make sure that all parts are properly tightened before you use the exercise cycle. | Note: After assembly is |
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor. |
|
7