
3.The Console (16) requires three AA batteries; alkaline batteries are recommended. Insert three batteries into
the battery compartment. | Make sure that the batter- | |
ies | are oriented as shown by the markings inside | |
the | battery compartment. |
|
4.Hold the Console (16) near the Handlebar (15). Insert the console wire into the indicated hole in the Handlebar. Note: The console wire is longer than shown.
Attach the Console (16) to the Handlebar (15) with four
M4 x 16mm Screws (49). Be careful to avoid pinch- ing the console wire.
5. While another person holds the Handlebar (15) near
the Upright (13), insert the console wire down through the Upright. Attach the Handlebar to the Upright with three M8 x 15mm Button Screws (34) and three M8
Split Washers (42). Be careful to avoid pinching the
console wire. Note: The console wire is longer than shown.
3 |
| |
Batteries |
| |
16 |
| |
4 |
| |
| 16 | |
| Console | |
Hole | Wire | |
| ||
| 15 | |
49 | Be careful to | |
| ||
| avoid pinching | |
49 | the console wire. | |
5 |
| |
| Be careful | |
| to avoid | |
| pinching the | |
| console | |
| wire. | |
| 15 | |
34 | Console Wire | |
| ||
42 | 34 | |
42 | ||
| ||
34 | 13 |
5