The baud rate is listed under “Specifications” in the operating instructions of each piece of equipment. It is also indicated near the i.LINK interface on some devices.
The baud rate may differ from the indicated value when the unit is connected to a device with a different maximum baud rate.
* What is Mbps?
Mbps stands for “megabits per second,” or the amount of data that can be sent or received in one second. For example, a baud rate of 100 Mbps means that 100 megabits of data can be sent in one second.
To use i.LINK functions on this unit
For details on how to dub when this unit is connected to other video devices having an i.LINK Interface, see page 62.
This unit can also be connected to other i.LINK compatible devices made by Sony (e.g. a VAIO series personal computer) as well as to video devices.
Before connecting this unit to your computer, make sure that application software supported by this unit is already installed on your computer.
Some i.LINK compatible video devices, such as Digital Televisions, DVD, MICROMV or HDV recorders/players are not compatible with this unit. Before connecting to other devices, be sure to confirm whether the device is compatible with an HDV/DV device or not. For details on precautions and compatible application software, refer also to the operating instructions for the device to be connected.
About the required i.LINK cable
Use the Sony i.LINK
Maintenance and precautions
On use and care
•Do not use or store the camcorder and accessories in the following locations.
–Anywhere extremely hot or cold. Never leave them exposed to temperatures above 60°C (140 °F), such as under direct sunlight, near heaters or in a car parked in the sun. They may malfunction or become deformed.
–Near strong magnetic fields or mechanical vibration. The camcorder may malfunction.
–Near strong radio waves or radiation. The camcorder may not be able to record properly.
–Near AM receivers and video equipment. Noise may occur.
–On a sandy beach or anywhere dusty. If sand or dust gets in your camcorder, it may malfunction. Sometimes this malfunction cannot be repaired.
–Near windows or outdoors, where the LCD screen, the viewfinder, or the lens may be exposed to direct sunlight. This damages the inside of the viewfinder or the LCD screen.
–Anywhere very humid.
•Operate your camcorder on DC 7.2 V (battery pack) or DC 8.4 V (AC Adaptor).
•For DC or AC operation, use the accessories recommended in these operating instructions.
•Do not let your camcorder get wet, for example, from rain or sea water. If your camcorder
gets wet, it may malfunction. Sometimes this malfunction cannot be repaired.
•If any solid object or liquid gets inside the casing, unplug your camcorder and have it checked by a Sony dealer before operating it any further.
•Avoid rough handling, disassembling, modifying, physical shock, or impact such as hammering, dropping or stepping on the product. Be particularly careful of the lens.
•Keep the POWER switch setting to OFF (CHG) when you are not using your camcorder.
•Do not wrap your camcorder with a towel, for example, and operate it. Doing so might cause heat to build up inside.
•When disconnecting the mains lead, pull it by the plug and not the cord.
•Do not damage the mains lead such as by placing anything heavy on it.
•Keep metal contacts clean.
106