19
GB
Getting started
Charging the battery using your computer
Turn off your camcorder and connect
the camcorder to a running computer
using the Built-in USB Cable.
To charge the battery using an AC-UD10 USB charger/AC Adaptor (sold
separately)
You can charge the battery by connecting the Built-in USB Cable to a wall outlet (wall socket)
using an AC-UD10 USB charger/AC Adaptor (sold separately). You cannot use a Sony CP-
AH2R, CP-AL, or AC-UP100 portable power supply device (sold separately) to charge the
camcorder.
Charging time
Approximate time (min.) required to fully charge a fully discharged NP-FV50 battery pack
(supplied).
When using the AC Adaptor: 155 min.
When using your computer connected with the Built-in USB Cable*: 280 min.
The charging times shown above are measured when charging the camcorder at a room temperature of
25 °C (77 °F). It is recommended that you charge the battery in a temperature range of 10 °C to 30 °C (50
°F to 86 °F).
* The charging times are measured without using the USB connection support cable.
Built-in USB Cable To the wall outlet
(wall socket)