bNotes

•When the remaining recordable time for movies is less than 5 minutes, the indicator stays on the screen.

SUB-T DATE (Subtitle date)

When you set to [ON] (the default setting), you can display the recording date and time while playing back the image recorded on your camcorder, on devices compatible with the subtitle display function. Refer also to the instruction manual of the display device.

bNotes

•The images recorded with HD (high definition) image quality can be played back only on AVCHD format compatible devices.

•[SUB-T DATE] cannot be set for SD (standard definition) image quality.

FLASH MODE

You can select the flash setting when you record still images with the built-in flash or an external flash (optional) that is compatible with your camcorder.

BAUTOAutomatically flashes when there is insufficient ambient light.ON ( )Always uses the flash regardless of the surrounding brightness.OFF ()Records without flash.

bNotes

•The recommended distance to the subject when using the built-in flash is approximately 0.3 to 2.5 m (1 to 8 feet).

•Remove any dust from the surface of the flash before using it. Flash effect may be impaired if heat discoloration or dust obscures the lamp.

•The /CHG (charge) lamp flickers while charging the flash, and remains lit when the battery charge is complete.

•If you use the flash in bright places such as when shooting a backlit subject, the flash may not be effective.

FLASH LEVEL

You can set this function when you use the built-in flash, or an external flash (optional) that is compatible with your camcorder.

HIGH( )Makes the flash level higher.BNORMAL()LOW()Makes the flash level lower.

REDEYE REDUC

You can set this function when you record still images using the built-in flash or an external flash (optional) that is compatible with your camcorder.

When you set [REDEYE REDUC] to [ON], then set [FLASH MODE] to [AUTO] or [ON], appears. You can prevent redeye by activating the pre-flash before the flash flashes.

bNotes

•The redeye reduction may not produce the desired effect due to individual differences and other conditions.

FACE DETECTION

Detects faces and adjusts the focus, color and exposure automatically. Also, optimizes the face image.

BON ()

Detects a face and shows a frame on it. The detected face image is optimized automatically.

camcorder your Customizing

69