GENERAL SET

(Other setup items)

Touch 1, then 2.

If the item is not on the screen, touch / to change the page.

How to set

(HOME MENU) t page 64 (OPTION MENU) t page 78

The default settings are marked with B.

DEMO MODE

The default setting is [ON], allowing you to view the demonstration in about 10 minutes, after you turn the POWER switch to (Movie).

zTips

•The demonstration will be suspended in situations such as those described below.

–When you press START/STOP or PHOTO

–When you touch the screen during the demonstration (The demonstration starts again after about 10 minutes)

–When you set the POWER switch to (Still)–When you press (HOME) or (VIEWIMAGES)REC LAMP (Recording lamp)

The camera recording lamp on the front of your camcorder lights up, as the default setting is [ON].

CALIBRATION

See page 104.

A.SHUT OFF (Auto shut off)B5 min

The camcorder is automatically turned off when you do not operate your camcorder for more than approximately 5 minutes.

NEVERThe camcorder is not automatically turned off.

bNotes

•When you connect your camcorder to a wall outlet (wall socket), [A.SHUT OFF] is automatically set to [NEVER].

QUICK ON STBY (Quick on standby)

You can set the time that you want the camcorder to remain on before turning off in sleep mode (p. 32). The default setting is [10min].

bNotes

•[A.SHUT OFF] does not work during sleep mode.REMOTE CTRL (Remote control)The default setting is [ON], allowing you to use the supplied Remote Commander(p. 111).

zTips

•Set to [OFF] to prevent your camcorder from responding to a command sent by another VCR remote control unit.

DROP SENSOR

When the drop sensor has detected that the camcorder has been dropped, your camcorder may not allow you to record and play back correctly to protect the internal hard disk, as the default setting is [ON]. When dropping is detected, appears.

76