OUTPUT SETTINGS (Items for when connected to a TV)

The default settings are marked with .

TV TYPE

You need to convert the signal depending on the TV connected when playing back movies and photos. The recorded movies and photos are played back as following illustrations.

Steps

(MENU) [TV TYPE] (under [OUTPUT SETTINGS] category) a desired setting

Select this to view your movies on a 16:9 (wide) TV. The recorded movies and photos are played back as shown below.

Movies and photos recorded in 16:9

Movies and photos recorded in 4:3

(wide) mode

mode

16:9

Select this to view your movies and photos on a 4:3 standard TV. The recorded movies and photos are played back as shown below.

Movies and photos recorded in 16:9

Movies and photos recorded in 4:3

(wide) mode

mode

4:3

Notes

Horizontal to vertical ratio of high definition image quality (HD) movies is 16:9.

When you connect your camcorder to a TV compatible with the ID-1/ID-2 system, set [TV TYPE] to [16:9]. The TV switches to full mode automatically. Refer also to the instruction manuals supplied with your TV.

COMPONENT

Select [COMPONENT] when connecting your camcorder to a TV with the component input jack.

Contents of Table

Techniques Recording Useful

Index

92