Sony HDR-UX10 Do not use a, On the pickup lens, Touch [CANCEL] to cancel, –In hot or humid locations, On maintenance of the casing, About care of the viewfinder

3Touch “×” displayed on the screen with the corner of the “Memory Stick PRO Duo” or the like 3 times. The position of “×” changes.

Touch [CANCEL] to cancel.If you did not press the right spot, try the calibration again.

bNotes

•Do not use a sharp-pointed object for calibration. Doing so may damage the LCD screen.

•You cannot calibrate the LCD screen if it is rotated, or closed with the screen facing out.

On maintenance of the casing

•If the casing is soiled, clean the camcorder body with a soft cloth lightly moistened with water, and then wipe the casing with a dry soft cloth.

•Avoid the following to avoid damage to the finish:

–Using chemicals such as thinner, benzine, alcohol, chemical cloths, repellent, insecticide and sunscreen.

–Handling the camcorder with above substances on your hands.

–Leaving the casing in contact with rubber or vinyl objects for a long period of time.

On the pickup lens

•Do not touch the pickup lens inside the disc cover. Keep the disc cover closed except when inserting and removing the disc, to keep dust out.

•When your camcorder does not work because the pickup lens is dirty, clean it with a blower (optional). Do not touch the pickup lens directly during cleaning because this may cause the camcorder to malfunction.

Pickup lens

About care and storage of the lens

•Wipe the surface of the lens clean with a soft cloth in the following instances:

–When there are fingerprints on the lens surface.–In hot or humid locations–When the lens is exposed to salty air such as at the seaside.•Store in a well-ventilated location subject to little dirt or dust.

•To prevent mold, periodically clean the lens as described above. It is recommended that you operate your camcorder about once a month to keep it in optimum state for a long time.

About care of the viewfinderTo remove dust from inside the viewfinder, follow the procedure below.

of the viewfinder with a fine-tipped	Additional
1 Pull out the viewfinder.
2 While pushing in the tab on the bottom
implement such as a ball point pen, pull	Information
the eyecup block in the direction of the
arrow to remove.
Tab

Continued , 133