When the battery is charged, disconnect the AC Adaptor from the DC IN jack of your camcorder.
4
Align the mark on the DC plug with that on the DC IN jack.
The /CHG lamp lights up and charging starts. The /CHG lamp turns off when the battery pack is fully charged.
To the wall outlet (wall socket)
You can charge the “InfoLITHIUM” battery pack (H series) after attaching it to your camcorder.
You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder.
1 Turn off your camcorder by retracting the viewfinder and closing the LCD screen.
2 Attachclicks. the battery pack by sliding it in the direction of the arrow until it
3 Connect the AC Adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall socket).
/CHG lamp

Getting started

Step 1: Charging the battery pack

Battery pack

DC IN jack

ACCESS lamp

 

DC plug

(hard disk)

AC Adaptor Power cord (mains lead)

10