ASSEMBLY INSTRUCTION
Tools Required for Assembling the Machine: Two Adjustable Wrenches and
Allen Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) | Do not tighten the nuts and bolts until instructed to do so. |
B.) | Slide two Ø 2 ½” x 1” Rubber Bumpers (#33) onto the Guide Rods (#10). Insert |
| the two Guide Rods into the holes on the Rear Base Frame (#5). Secure each |
| Guide Rod with one M10 x 1” Allen Bolt (#47) and ∅ ¾” Washer (#59) from the |
| bottom. |
C.) | Attach the rear of Main Frame (#1) to the Rear Base Frame. Secure them with two |
| M10 x 2 ¾” Carriage Bolts (#46), one |
| (#59), and two M10 Aircraft Nuts (#56). |
D.) | Attach the Front Post (#6) to the Main Frame. Secure them with two M10 x 2 ¾” |
| Carriage Bolts (#46), one 4 ¾” x 2” Bracket (#18), two Ø ¾” Washers (#59), and |
| two M10 Aircraft Nuts (#56). |
E.) | Attach the Seat Support (#17) onto the Main Frame. Secure them with two M10 x |
| 2 ¾” Carriage Bolts (#46), one 4 ¾” x 2” Bracket (#18), two Ø ¾” Washers (#59), |
| and two M10 Aircraft Nuts (#56). |
F.) | Attach the Foot Plate (#14) onto the Front Post. Secure it with two M10 x 5/8” |
| Allen Bolts (#48) and two Ø ¾” Washers (#59). |
7
