Item | Item name | Settings |
number |
|
|
740 | MASTER LEVEL (HD) | Adjust the |
|
| This adjusts the Y, PB, and PR levels simultaneously. |
|
| 0.0% (0H) to [100% (800H)] to 141.3% (B4EH) |
|
|
|
741 | Y LEVEL (HD) | Adjust the Y level of the |
|
| connector. |
|
| 0.0% (0H) to [100% (800H)] to 141.3% (B4EH) |
|
|
|
742 | PB LEVEL (HD) | Adjust the PB level of the |
|
| connector. |
|
| 0.0% (0H) to [100% (800H)] to 141.3% (B4EH) |
|
|
|
743 | PR LEVEL (HD) | Adjust the PR level of the |
|
| connector. |
|
| 0.0% (0H) to [100% (800H)] to 141.3% (B4EH) |
|
|
|
745 | SETUP (BLACK) LEVEL | Adjust the setup level of the |
| (HD) | OUTPUT connector. |
|
| 0 to [110H] to 220H |
|
|
|
746 | SYNC PHASE (HD) | Control the H sync phase of the |
|
| OUTPUT connector according to the menu. |
|
| 0 to [80H] to FFH |
|
|
|
747 | FINE (HD) | Fine control the H sync phase of the |
|
| OUTPUT connector according to the menu. |
|
| [0] to 3FFH |
|
|
|
a) Not applicable in 24PsF/23.98PsF mode |
| |
Note
When you set setup menu items 715 through 718, 721, and 740 through 747, set VID.PROC on the P1 PROCS page of the function menu to MENU. Then the video output control function on the front panel is disabled.
Items 800 to 899: Settings for audio control
Item | Item name |
| Settings | |
number |
|
|
|
|
802 | DIGITAL AUDIO MUTING |
| Set the digital audio muting conditions during shuttle playback. | |
| IN SHUTTLE MODE |
| [OFF]: Not muted. | |
|
|
| CUEUP: Muted during | |
|
|
| FULL: Muted in shuttle mode. | |
|
|
| SLOW: Muted, with the speed less than ±0.2 time normal playback. | |
|
|
|
| |
807 | AUDIO OUTPUT PHASE |
| Select the output timing of digital audio playback signals (HD SDI, and SDI only). The | |
|
|
| reference position corresponds to a setting for 80H; when the setting is less than 80H, | |
|
|
| the output timing is advanced, and when it is higher than 80H, the output timing is | |
|
|
| delayed. (at 80H, 128 samples = approx. 2.7 ms, and 1 sample=approx. 20 µs) | |
|
|
| 0 to [80] to FF: Setting in this range | |
|
|
|
| |
808 | INTERNAL AUDIO SIGNAL |
| Select the operation of the internal audio test signal generator. | |
| GENERATOR |
| OFF: No operation | |
|
|
| SILNC: Silent signal | |
|
|
| [1KHZ]: At 1 kHz, −20 dB FS sine wave is supplied to all audio input channels. | |
|
|
|
| |
810 | AUDIO EDIT PREVIEW |
| Set the output phase for the audio playback signal when ASSEMBLE is set to ON. | |
| SWITCHER |
| [INT]: The audio playback signal output phase is the same as the output phase in | |
|
|
| mode. Use this setting when editing with a single VTR, or when previewing while | |
|
|
| watching the VTR output signal. | |
|
|
| EXT: The audio playback signal output phase is the same as the phase of an input | |
|
|
| video signal or external reference video signal. | |
|
|
|
| |
812 | AUDIO OUTPUT LEVEL |
| Set the audio output level. | |
|
|
| [+4 dB] 0 dB | |
|
|
|
|
|
|
|
| Note | |
|
|
| −20 dB is not displayed in the display window. | |
|
|
|
|
|
Menus Setup 9 Chapter
Items in the Extended Setup Menu 73