Sony HDW-S280 10-4Warning Messages

The setting is stored, and the set message will be detected.

Canceling detecting warning messages

Select a warning message to be cancelled, and press the ON/OFF function button to display OFF.

Press the ON/OFF function button to go out OFF. Press the SAVE function button.

4

5

Setting the warning message to be detected

1 Press the MENU button together with the PAGE button.

The WARNING screen appears.

2 Press the C EDIT function button.

3 Turn the MULTI CONTROL knob to display an item to be detected in the display window.

On the video monitor screen, move * to an item to be detected.

10-4 Warning Messages

Inspection and Maintenance 10 Chapter

If the unit detects abnormal status that has been set to be detected, the warning mark flashes at the right bottom in the display window. Even if the warning mark is flashing, you can operate the unit. When you press the MENU button together with the SHIFT button, a warning message appears in the display window. The warning message is stored in the error logger menu.

							INPUT : SDI
	0			0			CH1 IN : +4	COND
		–10		–10			CH2 IN : +4
							OUT : +4
C EDIT		–20		–20
							MONI L : 1
		–30		–30
							MONI R : 2
		–40		–40
	1		2 3			4		SHIT
			SDI
ERR LOG		59.94i
	VIUC DF				INT- PRE		F-RUN REM: M
EXIT	00:00:00:00
WARNING	(01):REFERENCE MISSING
		Warning message					Warning mark

Warning messages

Message	Description
REFERENCE	No reference signal is input.
MISSING
LOST LOCK	Capstan servo lock is released
	during playback, recording or editing.
NO VIDEO INPUT	No video signal is detected during
REC	recording.
ASYNCHRONOUS	Phase difference of the video input
VIDEO REC	signal and reference signal exceeds
	the allowable range during recording.
APR HARD AU	An audio signal is muting because of
MUTING	unlocking of PLL in an audio circuit.
HD TG UNLK AU	An audio signal is muting because of
MTING	unlocking of PLL of the HD timing
	generator.
SD TG UNLK AU	An audio signal is muting because of
MUTING	unlocking of PLL of the SD timing
	generator.
NO RF AU MUTING	An audio signal is muting because
	data on a tape cannot be read.
AUX DATA AU	An audio signal is muting because of
MUTING	incorrect system frequency.

80 Warning Messages