Sony HT-DDW700 About the indicators on the display

About the indicators on the display

1		2 3			4	5	6		7
			LFE SP		;DIGITAL	;PRO LOGIC II DTS
SW								D.RANGE		MEMORY
	L	C		R	SLEEP OPT COAX				STEREO MONO
SL S				SR
					qd qs qa			0	9
		qf

8

Name	Function
ASW	Lights up when audio signal is
	output from the SUB WOOFER
	jack.
BLFE	Lights up when the disc being
	played back contains an LFE
	(Low Frequency Effect)
	channel and the LFE channel
	signal is actually being
	reproduced.
CSP	Lights up when the receiver is
	turned on. This indicator does
	not light up if a headphone is
	connected to the PHONES jack.

D;DIGITAL Lights up when Dolby Digital signals are input.

Note

When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is not set to “ANALOG” (page 47).

E; PRO “; PRO LOGIC” lights up

LOGIC (II) when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. “; PRO LOGIC II” lights up when the Pro Logic II Movie/Music decoder is activated.

Note

Dolby Pro Logic and Dolby Pro Logic II decoding do not function for DTS format signals.

Name	Function
FDTS	Lights up when DTS signals are
	input.
	Note
	When playing a DTS format
	disc, be sure that you have made
	digital connections and that
	INPUT MODE is not set to
	“ANALOG” (page 47).

GMEMORY Lights up when a memory function, such as Name Input, Preset Memory (page 45), etc., is activated.

HPreset	Lights up when using the
station	receiver to tune in radio stations
indicators	you have preset. For details on
	presetting radio stations, see
	page 44.
ITuner	Lights up when using the
indicators	receiver to tune in radio stations
	(page 43), etc.

JD.RANGE Lights up when dynamic range compression is activated (page 29).

KCOAX	Lights up when INPUT MODE
	is set to “AUTO” and the source
	signal is a digital signal being
	input through the COAXIAL
	jack, or when INPUT MODE is
	set to “COAX IN” (page 47).
LOPT	Lights up when INPUT MODE
	is set to “AUTO” and the source
	signal is a digital signal being
	input through the OPTICAL
	jack, or when INPUT MODE is
	set to “OPT IN” (page 47).
MSLEEP	Lights up when the Sleep Timer
	function is activated (page 48).

6US