Marantz DV9600 Controls & Displays, Front panel, STANDBY indicator, Disc tray, 3 3 PLAY, 4 7 STOP

Models: DV9600

1 68
Download 68 pages 25.05 Kb
Page 13
Image 13
Controls & Displays

Controls & Displays

Front panel

1

2

3

4

5

6

7

8

9

0 - = ~ !

3

English

1STANDBY indicator

• Lights when the unit is in standby.

2Disc tray

• Place the disc here.

33 (PLAY)

• Begin the disc play.

47 (STOP)

• Stops the disc play.

58 (PAUSE)

• Pausing the disc play.

6POWER ON/OFF

Press to turn the power on, and press it again to turn the power off.

8Display – page 14

• Operation indications are displayed here.

9Dolby Head Phone Mode

Each time it is pushed, the operation changes as shown below.

DH 1: Reproduces a room that is small with little reverberation.

DH 2: Reproduces a room with more reverberation than DH1.

DH 3: Reproduces a larger room than DH1.

Bypass: It outputs normal Audio Sound without Dolby effect.

100 (OPEN/CLOSE)

• Press to open and close the disc tray.

7HDMI/DVI RESOLUTION

The HDMI on/off state toggles when pressed for three seconds or more. When on, the display indicates HDMI ON; when off, it indicates HDMI OFF.

Pressing this button while HDMI is enabled displays the current resolution. Pressing this button again while the resolution is displayed allows you to select the resolution in the sequence below:

480i/576i ￿ 480p/576p ￿ 720p ￿ 1080i ￿ 1080p ￿ 480i/576i

An asterisk (*) precedes resolutions supported by the connected TV. For example: *720p See page 52 for more details.

Front panel Note

HDMI ON is set when the unit is shipped from the factory.

Set HDMI under the Setup menu to use HDMI functions (see page 52).

11Head Phone Jack

• Connect the head phone.

1STANDBY indicator Note

Audio is not output from the analog audio jacks or the HDMI jack when headphones are being used.

Audio is not output from the headphone jack when i.LINK is in use.

124 /1

Press to skip reverse title/group, chapter, or track. You can also press and hold this button to scan the above.

13Head Phone Level

Adjust the output of the head phone.

When using the Head Phone, Analog audio output and HDMI audio output cannot be output.

14¡/¢

Press to skip forward title/group, chapter, or

track. You can also press and hold this button to

 

13

scan the above.

 

Page 13
Image 13
Marantz DV9600 Controls & Displays, Front panel, STANDBY indicator, Disc tray, 3 3 PLAY, 4 7 STOP, 5 8 PAUSE, Power On/Off