Marantz DV9600 DVD Setup Menu, Using the FL menu, Selecting the FL menu, To exit the FL menu

DVD Setup Menu

Using the FL menu

The FL menu has been designed to set “HP PROLOGIC” and “REMOT CODE”.

It is recommended to set the FL menu before loading a DVD.

If a DVD has been loaded, be sure to press

7(STOP) twice before proceeding.

(If “RESUME” is displayed in the FL display, press 7 (STOP).)

Selecting the FL menu

Press SET UP for longer than 2 sec.

The FL OFF indicator on the player turns on and off.

FL menu is displayed in the FL display.

FL OFF

FL menu

Use the cursor buttons (5/∞) to select the FL menu you want as follows.

(Example)

HP PROLOGIC

STOP

REMOT CODE

MENU

SET UP

To exit the FL menu

When you have compleated setting up the FL menu or if you want to exit the FL menu, press SET UP to close the FL menu.

HP PROLOGIC setting

Select HP PROLOGIC, then press ENTER.

Use the cursor buttons (5/∞) to select ON or OFF as follows.

(Example)

PL2 ON *

PL2 OFF

* Factory setting

Press ENTER you want to set.

The menu selection is set.

Note

•This function only affects the headphone output.

•When set to PL2 ON, 2-channel source material is converted to the 5.1 channel format allowing you to enjoy a more expansive head- phone listening experience. (page 13)

REMOT CODE setting

Select REMOT CODE, then press ENTER.

Use the cursor buttons (5/∞) down to select the type of REMOT CODE you want to set as follows.

(Example)

DVD 1 *

DVD 2

* Factory setting

Press ENTER you want to set.

The menu select is set.

•The DVD player support two remote control codes: DVD 1 and DVD 2.

•Set the remote control code of the Remote Control to the same setting.

•See page 15 for more information.

32