Marantz DV9600 manual Level, Remember, DVD Setup Menu, English, Press ENTER Press ENTER

DVD Setup Menu

Level

• Default setting: Fix

You may want to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs.

Under the default setting, all channels are output at the relative volumes they were recorded at. Change the setting to Variable, if you want to adjust the relative volume levels of any of the speakers. Adjustment is in the range of -6dB to +6dB, in steps of 0.5dB.

•When you set it to Variable, the overall output level may sound quieter than when set to Fix. This is not a malfunction.

Press ENTER

Press ENTER

Cursor buttons (2/3): Speaker Change (at manual test tone)

Cursor buttons (5/∞): Output Level

Change

To help you gauge the correct gain levels, set the Test Tone to Manual (test tone from just that speaker) or Auto (test tone from each speaker in turn), then adjust the gain so that all speakers appear to be the same volume from your listening position.

Follow the on-screen displays to select speakers and set the Output Levels.

•Many AV amplifiers allow you to make similar settings at the amplifier stage. In this case, set the output levels at the player or the amplifier, not both.

•As the test tone plays through a speaker, its name is highlighted in yellow on-screen.

Remember

•You can't use the test tone function when the Audio Out setting is 2 Channel (see page 39). The test tone will not work with the disc tray open, or while a disc is playing.

•This setting cannot be chosen when i.LINK is connected or when HDMI is connected while either Auto or Multi PCM selected for the HDMI audio setting. (pages 54, 55)

6

English

41