The disc containing the MP3 tracks won’t play.

Additional Information

The disc containing the MP3 tracks won’t play.

If the disc is a recordable CD, make sure that the disc is finalized.

Check that the track(s) are in the MPEG1 Audio Layer 3 format.

Check that the sampling rate of the track(s) are 44.1 or 48kHz.

Some MP3 tracks appear to be missing from a disc.

If a track name does not end in “.mp3” or “.MP3”, this player will not recognize it as an MP3 track.

This player only recognizes about 600 files on a disc. If there are more titles than this, you will not be able to play them.

This player is not compatible with multi-session discs. If the disc is multi-session, you will only be able to play tracks recorded onto the first session.

The unit is connected to an HDMI/DVI component but the HDMI/DVI indicator on the display does not light.

Set the input selector on the connected TV or HDMI/DVI component to this unit.

This unit cannot be connected to TVs or HDMI/DVI components that do not support HDCP.

Reset this unit and the TV or HDMI/DVI component by turning them off and on. (page 15)

No video appears on the connected HDMI/DVI component.

• Is the indicator V OFF shown on the display?

The unit will not output a video signal if the video output has been disabled. Enable the video output with the VIDEO ON/OFF button on the remote control.

The unit will not output a video signal if the video output has been disabled in Pure mode.

Can the connected TV or HDMI/DVI component use the selected resolution and format?

Set the Resolution and Format under HDMI Setup. (page 52)

Set the input selector on the connected TV or HDMI/DVI component to this unit.

Press the CLEAR button on the remote control for three seconds or more. This reverts the unit to its default settings. (page 15)

TVs or HDMI/DVI components that do not support HDCP cannot output video from this unit.

No audio is coming from the connected HDMI component.

• Is the indicator V OFF shown on the display?

The unit will not output an audio signal if the video output has been disabled. Enable the video output with the VIDEO ON/OFF button on the remote control.

The unit will not output an audio signal if a CD is played while the video output has been disabled in Pure mode. (page 51)

The unit will not output an audio signal if Audio has been turned off under HDMI Setup. (page 54)

Can the connected TV or HDMI component use the selected audio settings?

Set the Audio settings under HDMI Setup. (page 54)

Some HDMI-compatible monitors do not support audio output.

The unit will not output an audio signal if a DVI compo- nent has been connected.

The unit will not output multi-channel or stereo audio signals from Super Audio CDs.

The unit will not output audio from DVD-Audio discs with CPPM copyright protection if the HDMI-connected component does not support HDMI standard Ver. 1.1.

The unit will not output audio from DVD-Audio discs that prohibit downmixing if 2ch PCM is selected.

Audio is not output when i.LINK is connected because i.LINK has priority over HDMI. (page 55)

The unit does not output audio or video correctly when connected to a DVI component.

Select HDMI OFF by pressing the HDMI/DVI RESOLU- TION button on the unit for three seconds or more. (page 13)

The unit is connected to an i.LINK component but the i.LINK indicator on the display does not light.

Set the input selector on the connected AV amplifier to this unit.

Reset this unit and the AV amplifier by turning them off and on.

The i.LINK indicator is lit but no audio is coming from the connected i.LINK component.

Check that the audio setting for i.LINK is On. (page 55)

Can the connected AV amplifier use the selected audio output format?

Set the Output Format under i.LINK Setup. (page 56)

Set the input selector on the connected AV amplifier to the i.LINK input.

Audio will not be output if the i.LINK-connected AV amplifier does not support the i.LINK AUDIO format.

Audio will not be output if the i.LINK-connected AV amplifier does not support copyright protection (DTCP).

Are all components between the AV amplifier and this unit turned on?

Signals cannot be transmitted if a component is turned off.

Auto Play does not work.

Select the AV amplifier you wish to link under the Auto Play setting. (page 56)

Multi-channel audio from a Super Audio CD or DVD-Audio disc is not output from the connected i.LINK component.

Select 5.1 channel from Audio Out under Audio Setup

1. (page 39)

64

Page 64
Image 64
Marantz DV9600 manual Additional Information, The disc containing the MP3 tracks won’t play, Auto Play does not work