Sony 3-283-375-11(2), HT-DDWG800 Using the Radio Data System (RDS), Use, Tips, Note, 55GB, Notes, Operations Tuner, If you made a mistake, To create an index name

To create an index name

1Use V/v/B/b to create an index name. Press V/v to select a character, then press B/b to move the cursor to the next position.

If you made a mistake

Press B/b until the character you want to change flashes, then press V/v to select the correct character.

Tips

•You can select the character type as follows by pressing V/v.Alphabet (upper case) t Numbers t Symbols•To enter a blank space, press b without selecting a character.2Press to enter the name. The entered name is registered.Note (Models of area code CEL, CEK only)

When you name an RDS station and tune in that station, the Program Service name appears instead of the name you entered. (You cannot change the Program Service name. The name you entered will be overwritten by the Program Service name.)

Using the Radio Data System (RDS)

(Models of area code CEL, CEK only)

This receiver also allows you to use RDS (Radio Data System), which enables radio stations to send additional information along with the regular program signal. You can display RDS information.

Notes

•RDS is operable only for FM stations.

•Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS services in your area, check with your local radio stations for details.

Receiving RDS broadcasts

Simply select a station on the FM band using Direct Tuning (page 52), Automatic Tuning (page 51), or Preset Tuning (page 54).

When you tune in a station that provides RDS services, “RDS” lights up and the program service name appears on the display.

Note

RDS may not work properly if the station you tuned to is not transmitting the RDS signal properly or if the signal strength is weak.

55GB

Operations Tuner