Tip

The distance between the center speaker and the listening position B cannot be more than 1.5 meters closer than the one between the listening position and the front speaker A. Place the speakers so that the difference in the length of B in the following diagram is no more than 1.5 meters closer than the length of A.

Example: Adjust the distance B to 4.5 meters or more when the distance A is 6 meters.

Also, the distance between the surround speakers and the listening position C cannot be more than

4.5meters closer than the distance between the listening position and the front speakers A. Place

the speakers so that the difference in the length of C in the following diagram is no more than 4.5 meters closer than the length of A.

Example: Adjust the distance C to 1.5 meters or more when the distance A is 6 meters.

This is important because incorrect speaker placement is not conductive to the enjoyment of surround sound. Please note that placing the speakers closer than the required will cause a delay in the output of the sound from that speaker. In other words, the speaker will sound like it is farther away. Adjusting these parameter while listening to the sound often results in much better surround sound. Give it try!

xSUR POS.(Surround speaker position)

Lets you specify the location of your surround speakers for proper implementation of the surround effects in the CINEMA STUDIO EX modes (page 49).

Operations Amplifier

•BEHD/HI

Select if the location of your surround speakers corresponds to sections B and D.

•BEHD/LO

Select if the location of your surround speakers corresponds to sections B and C.

•SIDE/HI

Select if the location of your surround speakers corresponds to sections A and D.

•SIDE/LO

Select if the location of your surround speakers corresponds to sections A and C.

continued

45GB