8:Adjusting the speaker levels and balance

(TEST TONE)

You can adjust the speaker levels and balance while listening to the test tone from your listening position.

Tip

The receiver employs a test tone with a frequency centered at 800 Hz.

D.TUNING

7 8 9

D.SKIP

>10MEMORY AMP MENU 1 - 0/10 ENTER

CLEAR

 

TOOLS/

DISPLAY

OPTIONS MUTING

TV VOL

MASTER VOL

2-5

MASTER

VOL +/–

O

 

 

 

RETURN/EXIT

MENU/HOME

TV CH –

REPLAY

ADVANCE

TV CH +

PRESET –

PRESET +

.

<

<

>

1 Press AMP MENU.

“1-LEVEL” appears on the display.2 Press or b to enter the menu.3 Press V/v repeatedly to select “T. TONE”.4 Press or b to enter the parameter.5 Press V/v repeatedly to select “T. TONE Y”.The test tone is output from each speaker in sequence as follows:Front left t Center t Front right t Surround right t Surround left t Sub woofer

6 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker.

For details, see “Adjusting the level (LEVEL menu)” (page 40).

Tips

•To adjust the level of all speakers at the same time, press MASTER VOL +/–. You can also use MASTER VOLUME on the receiver.

•The adjusted value are shown on the display during adjustment.7 Repeat steps 1 to 5 to select “T. TONE N”.You can also press any input buttons. The test tone turns off.When test tone is not output from the speakers•The speaker cords may not be connected securely.•The speaker cords may have short-circuit problem.
32GB