Paradyne 8955, 8968, and 8985 manual Configuring Adsl Ports 8965

3. Configuration Using the Web Interface

Configuring ADSL Ports (8965, 8968)

Use the Configuration - DSL Port screen to set parameters for an ADSL port on the 8965 or 8968 line card.

Procedure

To configure an ADSL port:

1.Select a Port from the drop-down list and click on Select. Current values for the port are displayed.

2.Enter or select the following fields:

Field	Description
Line Circuit Name	Enter a name from 1 to 255 characters long to indicate to
	whom the port is assigned. The following values are
	reserved and cannot be used: AVAILABLE (port is not
	assigned), and FAULTY (port is faulty and can not be
	assigned).
Line Code	Select a line code:
	MultiMode - The port uses the line code of its partner
	modem
	ANSI T1.413 - The port uses DMT modulation
	ITU G.dmt Annex A - The port uses G.992.1 Annex A
	modulation
	ITU G.dmt Annex B - The port uses G.992.1 Annex B
	modulation
	ITU G.lite - The port uses G.992.2 modulation
	ADSL2 Annex A - The port uses G.992.3 Annex A
	￿modulation
	ADSL2+ Annex A - The port uses G.992.5 Annex A
	modulation
DSL Line Profile Name	Enter the name of a DSL line profile to set rates for the
	port.
DSL Alarm Profile Name	Enter the name of a DSL alarm profile to set alarm
	thresholds for the port.
ADSL2 PSD Profile Name	Select a PSD profile from the drop-down list.
ADSL2+ PSD Profile Name	Select a PSD profile from the drop-down list.

8900-A2-GB20-30 June 2004 3-3