Paradyne 8968, 8965, 8955 Configuring Cross Connections, Default Mappings, 3-12, Procedure, Field

3. Configuration Using the Web Interface

Configuring Cross Connections

Use the Configuration - Cross Connect screen to establish or delete Virtual Channel Connections (VCCs) by port or by slot. Connections may be established between any combination of:

￿Subtended ports

￿DSL ports

￿Network interface (uplink)

Default Mappings

A DSL port’s data VPI/VCI is always 0,35.

Default VC mappings to the SCP card for data service may be determined so:

￿VPI is 2 for ports 1–24 and 3 for ports 25–48

￿VCI is (Slot * 24) + (Port number up to 24) + 7

Port numbers 25 through 48 are reduced (by 24) to 1 through 24, respectively, in calculating VCI. So the VCI for Slot 3, Port 1 is the same as the VCI for Slot 3, Port 25:

Slot 3, Port 1: 3*24 + 1 + 7 = 80

Slot 3, Port 25: 3*24 + 25 – 24 + 7 = 80

Adding a Port-to-Port Cross Connection

Procedure

To create a cross connection between specified ports:

1.On the Configuration - Cross Connect screen, click on Create New Cross Connect. The Configuration - Cross Connect Create screen appears.

2.Enter or select the following fields:

Field

Port A

Slot

Port

VPI

Start VCI

Description

Select from the drop-down list the slot where the card associated with this port resides.

Select the port for the cross-connection.

Enter the VPI for this side of the cross-connection.

Enter the first VCI for this side of the cross-connection.

3-12 June 2004 8900-A2-GB20-30