6. Maintenance Procedures

Uploading and Downloading a Configuration

Your configuration options for the BAC reside in a file in memory on the SCP card. This file may be saved for purposes of disaster recovery by uploading it to an FTP (File Transfer Protocol) server. A configuration file may be restored by downloading it from an FTP server.

Use the System - Save and Restore screen to:

￿Save (upload) the configuration to an external file using FTP.

￿Restore (download) the configuration from an external file using FTP. A downloaded configuration file remains in the memory of the SCP card until it is overwritten by another downloaded configuration file, or until the SCP card is reset to factory defaults.

￿Reset the SCP card using factory default configuration settings

￿Reset the SCP card using downloaded configuration settings

Procedure

To upload and download configurations:

1.In the Configuration (FTP) box, set the parameters as shown in the following table.

Configuration (FTP) Parameters

FTP Server IP Address

Specify the network address of the FTP server where

 

the configuration is to be uploaded to or downloaded

 

from. For example: 137.90.128.10

 

 

User Name

Specify a user name accepted by the FTP server. For

 

example: admin

 

 

Password

Specify a password accepted by the FTP server. For

 

example: admnpass

 

 

Filename

Specify the name or pathname of the configuration file.

 

For example: /configs/may_2003_backup.cfg

 

 

2.Click on the:

Download button to copy a configuration file to the SCP card

Upload button to back up the configuration file to a server

A Configuration Transfer Status frame is displayed showing the filename, server address, number of bytes transferred, and the Transfer Status.

When the download or upload is complete, Transfer Status changes to "Transfer completed successfully."

6-2

June 2004

8900-A2-GB20-30

Page 38
Image 38
Paradyne and 8985, 8968, 8965, 8955 manual Uploading and Downloading a Configuration, Configuration FTP Parameters