Technical Specifications | Paradyne 8965, 8968, and 8985, 8955

Technical Specifications

B

Table B-1. ATM Line Card Technical Specifications (1 of 2)

Specifications	Criteria*

Size	Length:	25.4 cm (10 in)
	Height:	31.1 cm (12.3 in)
	Width:	2.0 cm (0.8 in)

Weight
Model 8955	0.9 kg (2.0 lbs)
Model 8965	0.6 kg (1.4 lbs)
Model 8968	0.9 kg (2.0 lbs)
Model 8985	0.6 kg (1.4 lbs)

Approvals
Safety Certifications	Refer to the equipment’s label for approvals on product.

Power	The ATM Line Card requires –48 VDC power input. The –48
	VDC power is distributed through the BAC backplane.
	Maximum Power Dissipation:
	27 watts
Model 8955	27 watts
	27 watts
Model 8965	61 watts
	61 watts
Model 8968	45 watts
	45 watts
Model 8985

Physical
Environment
Operating temperature	0° to 50° C (32° to 122° F)
Storage temperature	–20°to 70° C (–4°to 158° F)
Relative humidity	5% to 85% (noncondensing)
Shock and vibration	Withstands normal shipping and handling.

* Technical specifications are subject to change without notice.

8900-A2-GB20-30

June 2004

B-1

Image 45

Paradyne 8965, 8968, and 8985, 8955 manual Table B-1. ATM Line Card Technical Specifications 1 Criteria

Contents

ATM Line Cards Copyright 2004 Paradyne Corporation All rights reserved Contents Maintenance Procedures DiagnosticsConnector Pin Assignments Technical Specifications Index About This Guide Document Purpose and Intended AudienceDocument Summary Document Number Document Title Product-Related Documents ATM Line Cards About the ATM Line Cards ATM Line Card Features ATM FeaturesEndpoint Support Features Endpoint with Voice Interfaces Sample Network Configurations Snmp Management Capabilities Management Information Base MIB SupportSnmp Trap Support Accessing the SCP Card Web Interface IntroductionLogging Into the Web Interface Ending a Session Help Button Configuring Spectrum Management Configuration Using the Web InterfaceIf you would like to configure Card using See Overview Field Description Configuring ReachDSL Ports Configuring Adsl Ports 8965 Disabled Power management is disabled Configuring Shdsl Ports Upstream / Far End Profile Configuring Line Profiles 8955, 8965 Creating Line Profiles for Ports Downstream / Near End Alarm Profile Configuring Alarm Threshold Profiles 8955, 8965 Loss of Signal Seconds Violations in a 15-minute interval equals or exceeds this Creating Alarm Threshold Profiles for Model Loss of Sync Word Seconds Default Mappings Configuring Cross ConnectionsAdding a Port-to-Port Cross Connection Field Port B SCP VPI Adding a Slot-to-Slot Cross Connection Slot SCP Card Configuring ATM Ports Cdvt Configuring Traffic Profiles Configuration Using the Web Interface June Monitoring What to MonitorLocation of ATM Line Card Information 1 Field Screen Location of ATM Line Card Information 2 Field Screen Front Panel LEDs Models 8955, 8965, TypeLED is Indicating Front Panel LEDs Model Lamp Test Diagnostics Loopback Test Model 8985 Only Maintenance Procedures Configuration FTP Parameters Uploading and Downloading a Configuration Resetting the Configuration to Downloaded Settings Resetting the Configuration to Default Settings Downloading and Switching Firmware Downloading FirmwareFirmware Download Parameters Restarting the Line Card Switching Firmware Maintenance Procedures June Connector Pin Assignments 8820 Telco Connector PinoutsConnector Pins Port Tip, Ring Connector Connector Pins Port Tip, Ring Model 8968 Line Card Telco Connector Pinouts Table B-1. ATM Line Card Technical Specifications 1 Criteria Technical Specifications Table B-1. ATM Line Card Technical Specifications 2 Criteria Numerics Index IN-2 IN-3 IN-4