Paradyne 8955, 8968, 8965, and 8985 manual Creating Line Profiles for Ports

3. Configuration Using the Web Interface

3. Click on Apply.

Creating Line Profiles for Ports (8985)

Procedure

To create a line profile for SHDSL ports:

1.Click on Create New Profile. The SHDSL Profile Create screen appears.

2.Enter or select the following fields:

Field	Description
Profile Name	Specify a name for this line profile.
Max Rate	Enter a maximum rate from 192 to 2304 kbps.
Min Rate	Enter a minimum rate from 192 to 2304 kbps.
Mode	Select the regional setting supported, as specified by
	ITU-T G.991.2:
	Annex A
	￿Annex B
	Both
Remote Management	Select Enable or Disable from the drop-down list to
	determine whether remote management is supported for
	the network element this profile is assigned to.
Reference Clock	Select the timing source from the drop-down list:
	System – Clocking is provided by the backplane. (The
	backplane clock is configured on the Configuration -
	￿System - Clocking screen.)
	Local – Clocking is provided by an onboard oscillator.
Target Margin	Enter a target noise margin from 2–15 dBm, or None.
Interface	Select an interface from the drop-down list:
	￿Wire Pair 1 – The profile applies to Wire Pair 1.
	Wire Pair 2 – The profile applies to Wire Pair 2.
	Select Wire Pair 1 if this profile is to be used for ports that
	use only one wire pair.

3. Click on Apply.

8900-A2-GB20-30 June 2004 3-7