6. Maintenance Procedures

Switching Firmware

Procedure

To switch between the firmware currently running and alternate firmware stored in the unit:

1.Verify that the Running Firmware and Alternate Firmware displayed in the Firmware box are different versions.

2.Click on the Switch button. The unit is reset and:

The Running Firmware becomes the alternate firmware

The Alternate Firmware becomes the running firmware

3.Delete the cache used by your web browser before logging into the SCP card:

With Internet Explorer, select Tools -> Internet Options. On the General tab, in the Temporary Internet Files box, click on Delete Files.

With Netscape, select Edit -> Preferences. Click on Advanced, then click on Cache. On the Cache page, click on Clear Memory Cache, then click on Clear Disk Cache.

4.If you upgrade an 8965 or 8968 line card from a firmware level prior to 3.01.06, you must reset the card. See Restarting the Line Card, below.

Restarting the Line Card

The System - Restart screen allows you to reset a line card or SCP card and clear its statistics.

This is a software reset that does not power down the unit. However, all links are dropped, and the restarted line card retrains with its DSL endpoint.

Procedure

To restart a card:

1.Select a Slot from the drop-down list and click on Select.

2.Click on the Restart button.

8900-A2-GB20-30

June 2004

6-5

Page 41
Image 41
Paradyne 8965, 8968, and 8985, 8955 manual Restarting the Line Card, Switching Firmware