Paradyne 8965, 8968, and 8985, 8955 manual Loss of Signal Seconds

3. Configuration Using the Web Interface

Field	Description
Loss of Signal Seconds	SNMP trap and TL1 autonomous message are sent if the
	number of LOSS events in a 15-minute interval meets or
	exceeds the selected value (0–900 seconds, where 0
	disables the messages).
Loss of Link Seconds	SNMP trap and TL1 autonomous message are sent if the
	number of LOLS events in a 15-minute interval meets or
	exceeds the selected value (0–900 seconds, where 0
	disables the messages).
Errored Seconds	SNMP trap and TL1 autonomous message are sent if the
	number of ES events in a 15-minute interval meets or
	exceeds the selected value (0–900 seconds, where 0
	disables the messages).
Severely-Errored Seconds	SNMP trap and TL1 autonomous message are sent if the
	number of SES events in a 15-minute interval meets or
	exceeds the selected value (0–900 seconds, where 0
	disables the messages).
Unavailable Seconds	SNMP trap and TL1 autonomous message are sent if the
	number of UAS events in a 15-minute interval meets or
	exceeds the selected value (0–900 seconds, where 0
	disables the messages).
Increasing Rate	SNMP rate change trap and TL1 autonomous message
	are sent if the current rate is greater than or equal to the
	previous rate plus this threshold (065535 kbps, where 0
	disables the messages).
Decreasing Rate	SNMP rate change trap and TL1 autonomous message
	are sent if the current rate is less than or equal to the
	previous rate minus this threshold (065535 kbps, where 0
	disables the messages).
Init Failure	Specify whether initialization failure generates
	InitFailureTrap messages as specified in RFC 2662.
	￿Yes - Enable Initialization Failure Trap messages.
	No - Disable Initialization Failure Trap messages.

3. Click on Apply.

8900-A2-GB20-30 June 2004 3-9