Paradyne and 8985, 8968 manual Configuring Line Profiles 8955, 8965, Field, Description

3. Configuration Using the Web Interface

Configuring Line Profiles (8955, 8965, 8968)

Use the Configuration - Line Profiles screens to define line profiles to be assigned to ports.

To create a line profile for ReachDSL and ADSL ports:

1.Click on Create New Profile. The ADSL Profile Create screen appears.

2.Enter or select the following fields:

Field	Description
Profile Name	Specify a name for this line profile.
Latency	Select the channel the following rates are effective for:
	Fast or Interleaved.
	For ADSL, S=1/2 encoding is not supported when
	Latency is set to Fast. For ADSL2, S=1/2 is supported in
	both modes.
Downstream / Near End Profile
Max Rate (kbps)	Enter a maximum rate from 0 to 65535.
Min Rate (kbps)	Enter a minimum rate from 0 to 65535.
Max Delay	Select the maximum delay allowed for the interleaved
	channel, in milliseconds.
Max Additional Noise Margin	Select the maximum additional noise margin.
Min Noise Margin	Select the minimum noise margin.
Target Noise Margin	Select a target noise margin.
Max Spectrum Density	This is set to 40 dBm/Hz.
Rate Adaptive Mode	Select a rate adaptive mode:
	Manual - Manually selected at startup
	￿Init - Automatically selected at startup
	Dynamic - Automatically selected at run time
Upstream / Far End Profile
Max Rate (kbps)	Enter a maximum rate from 0 to 65535.
Min Rate (kbps)	Enter a minimum rate from 0 to 65535.
Max Delay	Select the maximum delay allowed for the interleaved
	channel, in milliseconds: 1, 4, or 16.
	To obtain the fastest rate downstream for ADSL (not
	ADSL2) endpoints that support S=1/2 encoding, set
	Latency to Interleaved and Max Delay to 1 ms.
Max Additional Noise Margin	Select the maximum additional noise margin.
Min Noise Margin	Select the minimum noise margin.
Target Noise Margin	Select a target noise margin.

3-6 June 2004 8900-A2-GB20-30