Paradyne and 8985 Adding a Slot-to-Slot Cross Connection, 3-14, Procedure, Field, Description

3. Configuration Using the Web Interface

Adding a Slot-to-Slot Cross Connection

Procedure

To create a range of VCCs between specified slots and the SCP card:

1.On the Configuration - Cross Connect screen, click on Create Cross Connect by Slot. The Configuration - Cross Connect - Slot screen appears.

2.Enter or select the following fields:

Field	Description
Start Slot	Select from the drop-down list the first slot in a range to
	have connections established to the SCP card.
End Slot	Select from the drop-down list the last slot in a range to
	have connections established to the SCP card. It may be
	the same as the Start Slot.
Start Port	Select from the drop-down list the first port in a range to
	have a connection established to the SCP card. The
	range of ports will be applied to all slots selected.
End Port	Select from the drop-down list the last port in a range to
	have a connection established to the SCP card. It may be
	the same as the Start Port. The range of ports will be
	applied to all slots selected.
Slot VPI	Enter the VPI of this circuit.
Slot VCI	Enter the VCI of this circuit.
Segment End Point (Slot)	Select True or False from the drop-down list to signify
	whether this connection is the segment endpoint. This
	field determines if the port card will function as an
	endpoint for ATM OAM loopbacks. If False, the port card
	will loop back a cell only if its location ID matches the
	preconfigured location ID. (See Configuring ATM Ports on
	page 3-16.) All other loopback cells are passed to the
	next segment.
SCP VPI	Enter the VPI of this range of VCCs.
SCP Start VCI	Enter the first VCI of this range of VCCs.
Segment End Point	Select True or False from the drop-down list to signify
	whether this connection is the segment endpoint. This
	field determines if the port card will function as an
	endpoint for ATM OAM loopbacks. If False, the port card
	will loop back a cell only if its location ID matches the
	preconfigured location ID. (See Configuring ATM Ports on
	page 3-16.)All other loopback cells are passed to the
	next segment.
Upstream Profile	Select a profile for upstream traffic.
Downstream Profile	Select a profile for downstream traffic.

3-14 June 2004 8900-A2-GB20-30