1. About the ATM Line Cards

SNMP Management Capabilities

The ATM Line Cards support SNMP Version 1, and can be managed by

Paradyne’s GrandVIEW® or any industry-standard SNMP manager.

Management Information Base (MIB) Support

For a detailed description of supported MIBs, visit Paradyne’s Web site at

www.paradyne.com. The following MIBs are supported:

￿ATM Forum SNMP M4 Network Element View (af-nm-0095.001)

￿Definitions of Managed Objects for the ADSL Lines (RFC 2662)

￿Definitions of Managed Objects for ATM Management (RFC 2515)

￿Definitions of Managed Objects for HDSL2 and SHDSL Lines (draft-ietf-adslmib-hdsl2-10.txt)

￿Definitions of Textual Conventions and OBJECT-IDENTITIES for ATM Management (RFC 2514)

￿Evolution of MIB II Interfaces (RFC 2863)

￿ADSL Extension MIB (Models 8965 and 8968) (draft-ietf-adslmib-adslext.txt)

￿SHDSL MIB (Model 8985 only) (draft-ietf-adslmib-hdsl2.txt)

￿Entity MIB Using SMIv2 (RFC 2037)

￿MIB II and the Interfaces Group MIB (RFC 1213, RFC 2233)

￿Paradyne enterprise MIBs for:

xDSL Interface

SLE Device Control

SLE Device Health and Status

MaxVciVpi-MIB Table

IF-MIB Table

ATM VPL Statistics Table

SNMP Trap Support

The ATM Line Cards support SNMP traps as shown in the 8620 and 8820

Broadband Access Concentrator SNMP Reference.

1-4

June 2004

8900-A2-GB20-30

Page 10
Image 10
Paradyne and 8985, 8968, 8965, 8955 Snmp Management Capabilities, Management Information Base MIB Support, Snmp Trap Support