If color irregularity is observed

again...

Place the speaker further away from the TV set.

If howling occurs

Reposition the speakers or turn down the volume on the receiver.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine.

If you have any questions or problems concerning your receiver, please consult your nearest Sony dealer.

Troubleshooting

If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem.

Audio

There is no sound, no matter which component is selected, or only a very low-level sound is heard.

Check that the speakers and components are connected securely.

Check that both the receiver and all components are turned on.

Check that MASTER VOLUME is not set to “VOL MIN”.

Press MUTING to cancel the muting function.

Check that you have selected the correct component with the input buttons on the remote or INPUT SELECTOR on the receiver.

The protective device on the receiver has been activated. Turn off the receiver, eliminate the short-circuit problem, and turn on the power again.

Check that the IN MODE setting is correct.

There is no sound from a specific component.

Check that the component is connected correctly to the audio input jacks for that component.

Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the component.

Check that you have selected the correct component with the input buttons on the remote or INPUT SELECTOR on the receiver.

62GB