Sony HTSS2000, HT-SF2000 About the indicators on the display, Name, ALFE, Note, Note, KOPT, EHDMI, JCOAX, BSLEEP, Preset, HTuner, channel, station, D.RANGE, Function, Playback

About the indicators on the display

12		3		4	5
SLEEP	L	C	R	DIGITAL	HDMI
LFE				DTS	PL
SW	SL	S	SR		OPT COAX

	qf	qd qs qa q;
Name		Function
ALFE		Lights up when the disc being
		played back contains an LFE
		(Low Frequency Effect) channel
		and the LFE channel signal is
		actually being reproduced.
BSLEEP		Lights up when the sleep timer is
		activated (page 58).

CPlayback The letters (L, C, R, etc.) indicatechannel the channels being played back.

indicators The boxes around the letters vary to show how the receiver downmixes the source sound.

LFront LeftRFront RightCCenter (monaural)

SL	Surround Left
SR	Surround Right

SSurround (monaural or the surround components obtained by Pro Logic processing)

Example:Recording format (Front/ Surround): 3/2.1Sound Field: A.F.D. AUTO

L C R

SW SL SR

D; DIGITAL Lights up when receiver is decoding Dolby Digital signals.

Note

When playing a Dolby Digital format disc, be sure that you have made digital connections.

EHDMI	Lights up when a playback
	component is connected to this
	receiver using a HDMI jack
	(page 21).

6 7

D.RANGE

MEMORY RDS

ST MONO

9 8

Name FunctionFPreset Lights up when using the

station receiver to tune in radio stations indicators you have preset. For details on

presetting radio stations, see page 51.GD.RANGE Lights up when dynamic range compression is activated (page 35).

HTuner	Lights up when using the
indicators	receiver to tune in radio stations
	(page 49), etc.
	Note
	“RDS” lights up for models of
	area code CEL, CEK only.

IMEMORY Lights up when a memory function, such as Preset Memory (page 51), etc., is activated.

JCOAX	Lights up when IN MODE is set
	to “AUTO IN” and the source
	signal is a digital signal being
	input through the COAX IN
	jack, or when IN MODE is set to
	“COAX IN” (page 54).
KOPT	Lights up when IN MODE is set
	to “AUTO IN” and the source
	signal is a digital signal being
	input through the OPT IN jack,
	or when IN MODE is set to
	“OPT IN” (page 54).
L;PL(II)	“; PL” lights up when the
	receiver applies Pro Logic
	processing to 2 channel signals
	in order to output the center and
	surround channel signals.
	“; PLII” lights up when the
	Pro Logic II Movie/Music
	decoder is activated.

Started Getting

continued

7GB