14US

Installing the speaker on a

wall

You can install the speaker on the wall.

•Use screws that are suitable for the wall material a nd
strength. As a plaster board wall is especially fragile,
attach the screws securely to a wall beam. Install the
speaker on a vertical and flat reinforced area of the
wall.
•Be sure to subcontract the ins tallation to Sony dealers
or licensed contractors and pay special attention to
safety during the installation.
•Sony is not responsible for accidents or damage
caused by improper installation, insufficient wall
strength, improper screw installation or natural
calamity, etc.
1Prepare screws (not supplied) that are
suitable for the holes on the back of the
speaker. See the illustrations below.
2Fasten the screws to the wall. The
screws should protrude 6 to 7 mm
(approx. 1/4 inches).
3Hang the speaker onto the screws.

Align the holes on the back of the speaker to

the screws, then hang the speaker onto the

two screws.

Notes
Hole on the back of the speaker
4mm (1/6 inches)
more than 25mm (1 inch)
5mm
(1/5 inches)
10mm
(2/5 inches)
265mm
(10 2/5 inches)
6 to 7mm
(approx. 1/4 inches)