Getting Started
21US
2Turn on the system, the TV and the
connected equipment.
3Select the input of the system and the
HDMI input of the TV (BD/DVD, GAME,
or SAT/CATV), so that an image from a
connected equipment is displayed.
4Display the list of the HDMI equipment
on the TV menu, and set the Control for
HDMI function to on for the connected
equipment.
The Control for HDMI function for the
system and the connected equipment are
simultaneously set to on.
After you finish the setting, “COMPLETE”
appears on the front panel display.
•For details on setting the TV and the connected
equipment, refer to their operating instructions.

If “COMPLETE” does not appear

after performing the steps above

Set the Control for HDMI function to on for both
the system and the connected equipment
individually.
The default setting of the Control for HDMI
function of the system is “ON.”
1Press AMP MENU.
2Press X/x repeatedly until “SET HDMI”
appears, then press or c.
3Press X/x repeatedly until “CTRL
HDMI” appears, then press or c.
4Press X/x to select “ON.”
The Control for HDMI function is set to on.
5Press AMP MENU.
The AMP menu turns off.
6Select the input of the system
connected to the equipment you want
to use the Control for HDMI function for
(BD/DVD, GAME or SAT/CATV).
7Set the Control for HDMI function of the
connected equipment to on.
For details on setting the connected
equipment, refer to its operating
instructions.

If you add or reconnect an

equipment

Perform steps of “Preparing for “BRAVIA”
Sync” (page20) and “If “COMPLETE” does not
appear after performing the steps above” again.
•If the Control for HDMI function for the connected
equipment cannot be set simultaneously by setting
“CONTROL FOR HDMI” of the TV, set the Control
for HDMI function using the menu of the connected
equipment.
•For details on setting the TV and the connected
equipment, refer to their operating instructions.

Setting the Control for HDMI

function to off

Set the Control for HDMI function to off when
you connect equipment not compatible with
“BRAVIA” Sync, or that do not have HDMI
jacks, etc.
1Press AMP MENU.
2Press X/x repeatedly until “SET HDMI”
appears, then press or c.
3Press X/x to select “CTRL HDMI,” then
press or c.
4Press X/x to select “OFF.”
5Press AMP MENU.
The AMP menu turns off.
Note
Notes
AMP
MENU
C, X, x, c,