29US

Tuner Functions

2Press PRESET +/– repeatedly to select
the preset station.
Each time you press the button, the system
tunes in one preset station.
You can select the preset number directly by
pressing the number buttons while pressing
and holding SHIFT.
3Adjust the volume by pressing
MASTER VOL +/–.

To listen to non-preset radio

stations

Use manual or automatic tuning in step 2.
For manual tuning, see “Listening to the radio”
(page27) .
For automatic tuning, press and hold TUNING
+/–. The automatic tuning stops when the system
tunes in a station. To stop the automatic tuning
while automatic tuning is in progress, press
TUNING +/–.

If a FM program is noisy

If a FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1Press MENU.
2Press X/x repeatedly until “FM MODE”
appears on the front panel display, then
press or c.
3Press X/x to select “MONO.”
•STEREO: Stereo reception.
•MONO: Monaural reception.
4Press .
The setting is made.
5Press MENU.
•To improve reception, reorient the FM wire antenna
(aerial) (supplied).
You can enter a name for preset stations. These
names (for example, “XYZ”) appear on the front
panel display when a station is selected.
You can enter a name of up to 10 characters.
Note that no more than one name can be entered
for each preset station.
1Press TUNER.
The last received station is tuned in.
2Press PRESET +/– repeatedly to select
the preset station you want to create a
name for.
3Press MENU.
Tip

Naming preset stations

MENU
PRESET
+/–
C, X, x, c,
TUNER
continued