Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony HTDDW670 Selecting the component, 18GB, To mute the sound, To use the headphones, 1 Press input buttons to select the input, 2 Turn on the component and start playback

1 44

Download 44 pages, 2.17 Mb

Amplifier Operation

Selecting the component

1 Press input buttons to select the input.

To select the	Press
VCR	VIDEO 1 or
	VIDEO 2

Satellite tuner	VIDEO 2

DVD player	DVD

Super Audio CD or	SA-CD/CD
CD player

Built-in tuner (FM/AM)	FM or AM

The selected input appears in the display.

2 Turn on the component and start playback.

Note

If you select any video components, set the TV’s video input to match the component you selected.

3 Turn MASTER VOLUME –/+ to adjust the volume.

Note

To avoid damaging your speakers, make sure that you turn down the volume before you turn off the receiver.

To mute the sound

Press MUTING on the remote.

The muting function will be canceled when you do the following.

•Press MUTING on the remote again.

•Turn the power off.

•Increase the volume.

To use the headphones

Connect the headphones to the PHONES jack.

•When the headphones are connected, speaker output is automatically canceled and “SP” does not light up in the display.

•When the headphones are connected, you can select only the following sound fields (page 27).

–HP 2CH (HEADPHONE 2CH)

–HP THEA (HEADPHONE THEATER)

18GB

Contents

Page WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture About This Manual Table of Contents 1: Check how to hookup your components Required cords A Audio cord C Coaxial digital cord (supplied) BOptical digital cord 1a: Connecting components with digital audio output jacks Hooking up a Super Audio CD/CD player 1b: Connecting components with only analog audio jacks 2: Connecting the antennas 3: Connecting speakers Required cords A Speaker cords (supplied) B Monaural audio cord (not supplied) 12GB Installing the speakers on the wall 3 Hang the speakers on the screws 13GB 4:Connecting the AC power cord 5: Setting up the speakers 1 Press ?/1 to turn on the receiver 2 Press MAIN MENU repeatedly to select “SET UP” 3 Press or repeatedly to select the parameter you want to adjust 4 Press + or – repeatedly to select the setting you want x SLSRXXXX/XX (Surround speaker position) 16GB 6:Adjusting the speaker levels and balance —TEST TONE Selecting the component Listening to FM/AM radio Storing FM stations automatically — AUTOBETICAL Presetting radio stations Using the Radio Data System (RDS) Description of program types 22GB Changing the display About the indications in the display — 2CH STEREO Enjoying higher fidelity sound — AUTO FORMAT DIRECT Selecting a sound field xC.ST.EX C (CINEMA STUDIO EX C) DCS About CINEMA STUDIO EX modes Selecting a sound field for music Press MUSIC repeatedly to select the sound field you want xHALL Switching the audio input mode for digital components — INPUT MODE Customizing sound fields xCTR XXX dB (Center speaker level) xSUR.L. XXX dB (Surround speaker (left) level) xSUR.R. XXX dB Adjusting the tone Advanced settings xDEC (Digital audio input decoding priority) xDUAL (Digital broadcast language selection) xNAME IN Naming preset stations and inputs Using the Sleep Timer Before you use your remote Remote button description 34GB the Remote 35GB Changing the factory setting of an input button Precautions Troubleshooting The FM reception is poor Radio stations cannot be tuned in RDS does not work The RDS information that you want does not appear Remote control Specifications FM tuner section AM tuner section General 41GB Speaker section Models of area code CEL, CEK Front speakers (SS-MSP67LE/ SS-MSP67RE) Center speaker (SS-CNP87)Surround speakers (SS-MSP67SLE/ SS-MSP67SRE) Models of other area code Front speakers (SS-MSP67L/ SS-MSP67R) Center speaker (SS-CNP67)Surround speakers (SS-MSP67SL/ SS-MSP67SR) List of button locations and reference pages Index