Sony HTDDW670 Specifications, 40GB, Amplifier section, If the problem persist, AUDIO POWER SPECIFICATIONS, Reference sections for clearing the receiver’s memory

If you are unable to remedy the problem using the troubleshooting guide

Clearing the receiver’s memory may remedy the problem (page 14). However, note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver.

If the problem persist

Consult your nearest Sony dealer.

Reference sections for clearing the receiver’s memory

To clear	See
All memorized settings	page 14
Customized sound fields	page 29

Specifications

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

(Models of area code U only)

With 6 ohm loads, both channels driven, from 120 – 20,000 Hz; rated 60 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 milliwatts to rated output.

Amplifier section

Power Output1)
Models of area code U
(6 ohms 1 kHz, THD 10%)
FRONT2):	100 W/ch
CENTER2):	100 W
SURR2):	100 W/ch
(6 ohms 100 Hz, THD 10%)
SUB WOOFER2):	100 W

Models of area code CA

(6 ohms 1 kHz, THD 0.7%)

FRONT2):	60 W/ch
CENTER2):	60 W
SURR2):	60 W/ch
(6 ohms 100 Hz, THD 0.7%)
SUB WOOFER2):	60 W
(6 ohms 1 kHz, THD 10%)
FRONT2):	100 W/ch
CENTER2):	100 W
SURR2):	100 W/ch
(6 ohms 100 Hz, THD 10%)
SUB WOOFER2):	100 W

Models of area code MX, SP, E51, CEL, CEK (6 ohms 1 kHz, THD 0.7%)

FRONT2):	50 W/ch
CENTER2):	50 W
SURR2):	50 W/ch
(6 ohms 100 Hz, THD 0.7%)
SUB WOOFER2):	50 W
(6 ohms 1 kHz, THD 10%)
FRONT2):	85 W/ch
CENTER2):	85 W
SURR2):	85 W/ch
(6 ohms 100 Hz, THD 10%)
SUB WOOFER2):	85 W

40GB