Adjusting the tone

You can adjust the tonal quality (bass, treble level) of the front speakers using the TONE menu.

1 Start playing a source encoded with multi channel surround effects (DVD, etc.).

2 Press MAIN MENU repeatedly to select “TONE”.

3 Press or repeatedly to select the parameter you want to adjust.

For details, see “TONE menu parameters” below.

4 While monitoring the sound, press + or

repeatedly to select the setting you want.

The setting is entered automatically.

5 Repeat steps 3 and 4 to adjust the other items.

Note

You cannot adjust the tone when the receiver is decoding signals with a sampling frequency of more than 48 kHz.

TONE menu parametersxBASS XX dB(Front speaker bass level)xTREB. XX dB(Front speaker treble level)

Initial setting: 0 dB

You can adjust from –6 dB to +6 dB in 1 dB steps.

Advanced settings

Using the CUSTOMIZE menu to adjust the receiver

You can adjust various receiver settings using the CUSTOMIZE menu.

1 Press MAIN MENU repeatedly to select “CUSTOM”.2 Press or repeatedly to select the parameter you want to adjust.

For details, see “CUSTOMIZE menu parameters” below.

3 Press + or – repeatedly to select the setting you want.

The setting is entered automatically.

4 Repeat steps 2 and 3 to adjust the other items.CUSTOMIZE menu parameters

The initial settings are underlined.

xA.V.SYNC. X (Time alignment)

Y (Yes) (delay time : 68 ms)

The audio output is delayed so that the time gap between the audio output and visual display is minimized.

N (No) (delay time : 0 ms)

The audio output is not delayed.

Notes

This parameter is useful when you use a large LCD or Plasma monitor or projection TV.

This parameter is only valid when you use a sound field selected with the 2CH or A.F.D. buttons.

This parameter is not valid when PCM 96 kHz or DTS 2048 signals are input.

30GB