Sony HTSS1000P About the indicators on the display

About the indicators on the display

12		3		4
SLEEP	L	C	R	DIGITAL
LFE	SL		SR	DTS	PL
SW	SL	S	SR		OPT COAX


	qd			qs qa q; 9

Name				Function

A LFE				Lights up when the disc being
				played back contains an LFE
				(Low Frequency Effect) channel
				and the LFE channel signal is
				actually being reproduced.

BSLEEP				Lights up when the sleep timer is
				activated (page 47).

CPlayback The letters (L, C, R, etc.) indicate

channel the channels being played back.

indicators The boxes around the letters vary to show how the receiver downmixes the source sound.

LFront Left

RFront Right

CCenter (monaural)

SL	Surround Left
SR	Surround Right

SSurround (monaural or the surround components obtained by Pro Logic processing)

Example:

Recording format (Front/ Surround): 3/2.1

Sound Field: A.F.D. AUTO

L C R

SW SL

SR

D;DIGITAL Lights up when Dolby Digital signals are input.

Note

When playing a Dolby Digital format disc, be sure that you have made digital connections and the audio input mode for VIDEO 2 input or SA-CD/CD input is not set to “V2 ANLG” or “CD ANLG” (page 34).

5 6

D.RANGE

MEMORY RDS

ST MONO

8 7

Name Function

EPreset Lights up when using the

station receiver to tune in radio stations indicators you have preset. For details on

presetting radio stations, see page 44.

FD.RANGE Lights up when dynamic range compression is activated (page 29).

GTuner	Lights up when using the
indicators	receiver to tune in radio stations
	(page 41), etc.

HMEMORY Lights up when a memory function, such as Preset Memory (page 44), etc., is activated.

ICOAX	Lights up when the DVD input is
	selected.

JOPT	Lights up when
	– audio input mode for VIDEO 2
	input is set to “V2 AUTO” and
	the source signal is a digital
	signal being input through
	VIDEO 2 OPT IN jack (page
	34).
	– audio input mode for SA-CD/
	CD input is set to “CD AUTO”
	and the source signal is a
	digital signal being input
	through SA-CD/CD OPT IN
	jack (page 34).
	– audio input mode for VIDEO 2
	input or SA-CD/CD input is set
	to “V2 OPT” or “CD OPT”
	(page 34).

Started Getting

continued

5GB

Contents

Page WARNING About This Manual Table of Contents Description and location of parts Front panel About the indicators on the display Page Rear panel RM-AAU006 Page Page 1: Installing speakers Example of front speaker Installing the speakers on the wall 2 Fasten the screws to the wall. The screws should protrude 5 to 7 mm 3 Hang the speakers on the screws 2: Connecting speakers Notes on speaker cords Note on speakers 3: Connecting the audio/video components Component to be connected Connecting audio components If you connect a DVD recorder 4: Connecting the antennas 5:Preparing the receiver and the remote 6:Calibrating the appropriate settings automatically Performing Auto Calibration Press AUTO CAL Error codes To rectify the error Error code and remedies Warning codes To change the settings manually 7: Adjusting the speaker levels and balance To turn off the test tone Selecting a component To mute the sound To avoid damaging your speakers Listening/Watching a component Watching a DVD 1 Turn on the TV and DVD player 2 Turn on the receiver 3 Press DVD 4 Switch the input of the TV so that an image of the DVD is displayed Navigating through menus To return to the previous display To exit the menu Overview of the menus Page Adjusting the level LEVEL menu parameters Adjusting the tone TONE menu parameters Settings for the surround sound SUR menu parameters Settings for the tuner TUNER menu parameters Settings for the audio AUDIO menu parameters Settings for the system SYSTEM menu parameters xSL DIST. (Surround left speaker distance) xSR DIST. (Surround right speaker distance) xSUR PL (Surround speaker placement) Enjoying Dolby Digital and DTS Surround sound Types of A.F.D. mode Selecting a preprogrammed sound field Types of sound field available About DCS (Digital Cinema Sound) About CINEMA STUDIO EX modes To turn off the surround effect for movie/music Using only the front speakers and sub woofer Listening to FM/AM radio In case of poor FM stereo reception If you cannot tune in a station Storing FM stations automatically Presetting radio stations Using the controls on the receiver Displaying RDS information While receiving an RDS station, press DISPLAY repeatedly Description of program types Using the Sleep Timer Changing button assignments Categories and the corresponding buttons Glossary To clear all remote button assignments Precautions On safety On power sources On heat buildup On placement On operation If you encounter color irregularity on a nearby TV screen If color irregularity is observed Troubleshooting Remote control Error messages If you are unable to remedy the problem using the troubleshooting guide If the problem persist Reference sections for clearing the receiver’s memory Specifications Page Index