Setting power level (LEVEL)
The power level for the flash can be adjusted.
1
2
Press the select button to display “LEVEL” on the data panel.
•The current level is displayed.
•This step is not required when manual flash is selected. Go to step 2.
Press the + or – button to select the power level to be set.
•With TTL or manual flash photography the power level may be selected from the following.
1/1, 1/2, 1/4, 1/8, 1/16, 1/32
•With multiple flash photography the power level may be selected from the following.
1/8, 1/16, 1/32
44