3

4

Press the + or – button to select .

Press the select button repeatedly until blinking stops.

•“HSS” remains on the data panel.

•High-speed sync is cleared when is selected with the procedure described above, and a shutter speed faster than the sync speed can no longer be set.

•It is recommended that photos be taken in bright locations. When

photographing in dark areas the shutter speed will not exceed the

sync speed, even when is selected.

•The flash range with high-speed sync is smaller than for normal flash photography. Make sure that the subject is within the displayed flash range before taking the photo.

•High-speed sync cannot be used with multiple flash or bounce flash in the upwards, left, and right directions.

•When using a flash meter or color meter, high-speed sync cannot be used because it interferes with proper exposure. Either select to clear it or select a shutter speed lower than the sync speed.

Flash Sync Speed

Flash photography is generally associated with a maximum shutter speed referred to as the flash sync speed. This restriction does not apply to cameras designed for high-speed sync (HSS) photography (p. 35), since they allow flash photography at the maximum shutter speed of the camera.

36