Sony 70AP, 70P, 80P, DSR 70A, HVER-1500A, DSR-70, 85P, DSR-80, DSR-85, HVR-1500

58 DSR Series

VFL Format

[title_field] [CRLF]

[out_ch] [CRLF]

[in_point] [SP] [out_point] [SP] [drive_id] [SP] [filename] [SP] [av_select] ( [SP] [OPTION] [SP] [OPTION] ...[OPTION] )[CRLF]

[out_ch] [CRLF]

[in_point] [SP] [out_point] [SP] [drive_id] [SP] [filename] [SP] [av_select] ( [SP] [OPTION] [SP] [OPTION] ...[OPTION] )[CRLF]

[EOF]

OPTION may be omitted → Downward compatibility with the current format is maintained.

Contents of OPTION :

–Video_**** (**** : hex number) Unity = 0x4000

–Chroma_**** (**** : hex number) Unity = 0x4000

–Hue_**** (**** : hex number) Unity = 0x0000 (2’s Compliment)

–Setup_**** (**** : hex number) Unity = 0x0000 (2’s Compliment)

–Audio_****** (**** : hex number) Unity = 0x100000

–Fade_*(* : 0 or V or X) Fade effect is applied to the end of specified area.

Limitations of VFL TEXT

Limitations of the VFL TEXT that can be used in the DSR-DR1000 are shown below.

.The supported formats of the timecode data are LTC and FTC. (Attribute.dat of each Clip is used to

identify LTC.)

.A clip cannot be created during recording (It cannot be opened).

.When out_ch is specified, only the video signal can be used. The other channels are not supported.

.MUTE and FREEZE are not supported as filename of the VFL text.

.VFL in VFL is not supported.

.Extended VFL is not supported.

.With regard to av_select, only [*] is supported.

.With regard to the Drive ID, only 0 is supported.

.Title_field is not used as Data. (Even when there is no title_field, however, the subscript CRLF is

required.)

.The minimum Duration that can be registered at 1 Event is 5 Frames.

Sony - page 62